Laser Level with 2.5M Tape Measure and Three Projection Modes

Get Straighter Lines And Accurate Measurements With This Laser Measurer

You're hanging a picture frame and the entire thing tilts left after you step back. You eyeball it again, adjust the nail, and it's still crooked when you check. This laser measurer helps you mark straight lines on walls, align shelves evenly, and measure distances up to 2.5 meters.

This tool projects red laser lines across your wall in three directions: straight across, straight down, or at a diagonal angle. Press the button to switch between horizontal, vertical, or crosshair projection modes. The built-in bubble levels show when the tool sits flat at zero degrees, stands upright at ninety degrees, or angles at forty-five degrees.

The tape measure extends 2.5 meters and shows both metric and imperial markings down to one millimeter increments. The ABS body measures 19.5 by 6.5 centimeters and fits in one hand during use. Three bubble vials confirm level positioning before you project lines or take measurements.

The laser beam stays visible on indoor walls in normal room lighting conditions. You can set it on flat surfaces or hold it against walls while marking reference points. The tape retracts back into the housing after you finish measuring lengths or heights around the room.

• THREE PROJECTION MODES: Switch between horizontal, vertical, and crosshair laser lines for marking straight reference points across walls and ceilings.
  
  
• 2.5 METER TAPE MEASURE: Extends fully to measure lengths and heights with metric and imperial graduations marked down to one millimeter.
  
  
• TRIPLE BUBBLE LEVELS: Three vials indicate zero degree level, ninety degree plumb, and forty-five degree angles for confirming tool positioning.
  
  
• HANDHELD ABS CONSTRUCTION: Measures 19.5 by 6.5 centimeters in rigid plastic housing that holds steady against walls during projection.
  
  
• VISIBLE RED LASER BEAM: Projects clear lines on indoor surfaces under typical room lighting for marking installation points and alignment guides.
  
  
• RETRACTABLE MEASURING TAPE: Pulls out smoothly for distance checks and retracts back into the body after completing measurements around spaces.

MULTIFUNCTIONAL LASER MEASURER SPECS

• Material: ABS Plastic
  
  
• Dimensions: 19.5 x 6.5 cm
  
  
• Tape Length: 2.5 Meters
  
  
• Measurement Units: Metric and Imperial
  
  
• Graduation: 1mm Increments
  
  
• Laser Modes: Horizontal, Vertical, Cross
  
  
• Bubble Levels: 0°, 45°, 90°

PACKAGE INCLUDES:

• 1 x Multifunctional Laser Measurer